Watch Our Tutorial

Our Gang Sheet Builder makes creating your custom transfers fast and easy.

Watch this quick video for a step-by-step walkthrough:

Build Your Sheet

  1. Choose your gang sheet size.
  2. Upload your design(s) as PNG files with a transparent background (300 DPI).
  3. Arrange multiple designs on one sheet (resize & rotate as needed).
  4. Add your sheet to cart and checkout.

Pressing Your Transfer

Here are the recommended press settings for our DTF transfers:

  • Temperature: 300°F (149°C)
  • Time: 15 seconds
  • Pressure: Medium to firm
  • Peel: Hot peel (remove film immediately)
  • Post-press: Optional – press again for 5 seconds with a Teflon or parchment sheet for extra durability.

(Adjust slightly if pressing onto polyester or specialty fabrics.)

Prep Your Material

Before pressing, follow these quick prep tips:

  • Wash and dry the garment if possible (helps reduce shrinkage).
  • Pre-press for 3–5 seconds to remove moisture and wrinkles.
  • Always lint-roll the surface before pressing.
  • For polyester: use a lower temp or use a protective sheet to prevent scorching.

FAQs

We recommend PNG files with a transparent background, at 300 DPI for the cleanest results.

Yes! That’s exactly what the gang sheet builder is for — you can fill a sheet with as many designs as you’d like.

Upload at the size you want it to print (in inches). The builder will show you the exact dimensions.

With proper pressing and care, transfers can last 50+ washes. Wash inside out in cold water, tumble dry low or hang dry.

No — transfers are single use only.

Please double-check your artwork size and layout before ordering. We print exactly as uploaded.